AIM-ATM-1T1

AIM-ATM-1T1
Manufacturer: Cisco
Product ID: AIM-ATM-1T1
Product Description: High Performance ATM AIM/T1 Bundle, AIM-ATM w/ VWIC-1MFT-T1
Shipping: Typically ships within 2-3 days
Warranty: 1-Year Standard Warranty
Any Questions?
1-800-TO-MULTI or Email

Pre-Owned, Used And Refurbished Cisco AIM-ATM-1T1

Cisco Systems' AIM-ATM-1T1, or Bundle of AIM-ATM and VWIC-1MFT-T1, provides the functionality of the high-performance AIM-ATM enhanced by the VWIC. The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity. The AIM-ATM, when used with a Voice/WAN interface card (VWIC-MFT), can provide low-density ATM service without the use of a network module, thus freeing the valuable network module slot for other applications. A single AIM-ATM module can support up to 4 T1 or E1 lines of ATM services (two VWIC-MFT cards required) and the VWIC-MFT interface cards can connect to any ATM service provider network. Because the 2691, 3660, and 3700 Series can accommodate two AIM cards, when two AIM-ATM modules are installed, up to eight T1 or E1 of ATM services can be supported.

Our extensive AIM-ATM-1T1 inventory provides for quick order turn-around, often allowing us to ship "same day" or within just 1-2 business days. What's more? As an independent supplier, we are able to offer more equipment options than are available through distribution, including new, used and refurbished AIM-ATM-1T1. In some instances, our pre-owned equipment may still be in new condition, still sealed in original factory packaging (but at a fraction of the cost).

MLCP is committed to quality, and we guaranty any refurbished Cisco AIM-ATM-1T1 purchase with our standard one year warranty. All used AIM-ATM-1T1 equipment is tested to factory specifications and packaged professionally for safe transport. As an experienced supplier of pre-owned network hardware, we understand that we have to be better than the manufacturer, and that fundamental principle guides us every day.

Is your interest in the AIM-ATM-1T1 as a result of an upgrade? We may be interested in your surplus networking equipment and encourage you to take advantage of our flexible "buy-back" options, including an up-front purchase option and generous trade-ins for credit.

For a quote today, simply click onto the "Request a Quote" button on the right, or call 1-800-TO MULTI (866-8584) for assistance. Thank you!

You might also be interested in CISCO2620-DC.

General Information
Manufacturer: Cisco
Product ID: AIM-ATM-1T1
Product Description: High Performance ATM AIM/T1 Bundle, AIM-ATM w/ VWIC-1MFT-T1
Product Type: Advanced Integration Module
Marketing Information
The AIM-ATM optimizes the Cisco 2600, 2600XM, 2691, 3660, and Cisco 3700 Series modular multiservice routers by offering ATM adaptation layer 2 (AAL2) and ATM adaptation layer 5 (AAL5) support for low-density T1/E1 data and voice connections over ATM networks. This AIM module allows service providers and enterprise customers to take advantage of the reliability and quality of service (QoS) available with ATM connectivity.
Technical Information
Application/Usage: Voice
Interfaces/Ports
Interfaces/Ports: 1 x T1 WAN
Interfaces/Ports Details: 1 x RJ-48 T1 WAN
Media & Performance
Connectivity Media: Not Applicable
Data Transfer Rate: Not Applicable
Management & Protocols
Protocols: ATM
  VoIP
  PPPoA
  NHRP
Environmental Conditions
Temperature: 32°F (0°C) to 104°F (40°C) Operating
  -4°F (-20°C) to 149°F (65°C) Storage
Humidity: 10% to 85% Non-condensing Relative Humidity Operating
  10% to 85% Non-condensing Relative Humidity Storage
Physical Characteristics
Dimensions: 0.25" Height x 3.25" Width x 5.25" Depth
Miscellaneous
Additional Information:
  • Maximum number of ATM T1/E1s supported: Up to 4 ATM T1/E1's per AIM-ATM
  • Required Cisco IOS Image: Any Cisco IOS "Plus" Feature Sets

    Item Included:
  • High Performance ATM Advanced Integration Module (AIM-ATM)
  • 1-Port RJ-48 Multiflex Trunk - T1 (VWIC-1MFT-T1)

    The AIM-ATM supports the following ATM services:
  • Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV
  • ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR
  • AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support)
  • VoATM-AAL2 (trunked only)
  • Supports QoS features: Low-Latency Queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), per-virtual circuit queuing, pre-ATM VC shaping for non - real-time variable bit rate (VBR-nrt), Resource Reservation Protocol (RSVP), IP CoS map to ATM QoS services, CRTP (over Point-to-Point/Multilink over ATM)
  • Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only
  • ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0
  • LAN Emulation 2.0 Client and Server
  • Per VC queuing for segmentation
  • Support for up to 1024 AAL5 VCs for data/voice features
  • Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM
  • Network clock management support, which allows synchronization between the ATM network and PBX/Public Switched Telephone Network (PSTN)
  • 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR)
  • 32-Kbps minimum traffic rate
  • 13-bit range for VPI/VCI per interface
  • Maximum Burst Size (MBS) is up to 255 cells per VC
  • Dynamic management of the cell scheduler table
  • Operations and management (OAM) support (F5)
  • Early Packet Discard
  • AAL5 reassembly time-outs
  • AAL2 subcell multiplexing support
  • RFC 1483 support for multiple encapsulations over ATM
  • RFC 1577 support for routing over ATM
  • Multiprotocol routing over ATM (MPOA) client and server
  • IETF PPP over ATM
  • Next Hop Resolution Protocol (NHRP)
  • ILMI 4.0
  • IMA 1.1 Support
  • System Requirements: Minimum Cisco IOS Release required:
  • Cisco 2600 Series, 3660: 12.2(2)XA/12.2.4T
  • Cisco 2600XM Series: 12.2.8T1
  • Cisco 2691, 3700 Series: 12.2(11)YT and 12.2(13)T

    Hardware Prerequisites:
  • Cisco 2600 and 2600XM:
    - Available AIM slot
    - VWIC-MFT for WAN, PSTN or PBX connections
  • Cisco 3660:
    - MIX module and available AIM slots
    - VWIC-MFT in a NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV
  • Cisco 2691, 3700:
    - Available AIM slot
    - VWIC-MFT in a chassis WIC slot or in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, NM-2W, or NM-HDV
  • Compatibility:
  • Cisco 2610-2613
  • Cisco 2620
  • Cisco 2621
  • Cisco 2650
  • Cisco 2651
  • Cisco 2610XM
  • Cisco 2611XM
  • Cisco 2620XM
  • Cisco 2621XM
  • Cisco 2650XM
  • Cisco 2651XM
  • Cisco 2691
  • Cisco 3661
  • Cisco 3662
  • Cisco 3725
  • Cisco 3745
  • Certifications & Standards: Supports Industry Standards:
  • Medium complexity Codec types of G.711 a-law, G.711 u-law, G.726-32K, G.726-24K, G.726-16K, G.729A, G.729AB are all supported
  • High complexity Codec types of G.723.1 (all variations) G.728, G.729, G.729B and GSM-FR are supported
  • ATM standards such as AAL2, AAL5, UNI 3.0, UNI 3.1, and UNI 4.0 are supported

    Safety:
  • UL 60950 3rd Edition
  • CAN/CSA C22.2 No. 60950-00 3rd Edition
  • IEC 60950:1999, EN 60950:2000
  • AS/NZS 3260: 1993 with Amendments 1, 2, 3, and 4
  • TS001: 1996 with Amendment 1

    EMI/EMC:
  • Emissions:
  • 47CFR15 Class A (FCC)
  • CISPR22 Class A
  • EN55022 Class A
  • AS/NZS 3548 Class A (ACA)
  • ICES003 Class A (Industry Canada)
  • V-3 Class A (VCCI)
  • CNS13438 Class A (BSMI)
  • EN61000-3-2
  • EN61000-3-3
  • EN300386 Class A

    Immunity:
  • EN50024
  • EN50082-1
  • EN61000-6-1 (including EN 61000 4-2 Electrostatic Discharge; EN 61000 4-3 Radiated Susceptibility; EN 61000 4-4 Electrical Fast Transients; EN 61000 4-5 Power & Signal Line Surges; EN 61000 4-6 Injected RF Swept Immunity; EN61000-4-11 Voltage Dips + Sags)
  • EN300386

    Post Telephone & Telegraph (PTT):
  • This equipment complies with all the regulatory requirements for connection to the communications networks of each country in which it is sold
  • You might also be interested in:

    CISCO1802WPOE-E/K9

    CISCO1802WPOE-E/K9

    Cisco 1802W ETSI Approved Wireless Router And PoE Kit
    Learn More
    PA-A2-4T1C-T3ATM

    PA-A2-4T1C-T3ATM

    ATM CES Port Adapter, 4T1 CES Ports and 1 T3 ATM Port
    Learn More
    WIC-1AM-V2

    WIC-1AM-V2

    one-port Analog Modem Interface card
    Learn More