VWIC-1MFT-G703

VWIC-1MFT-G703
Manufacturer: Cisco
Product ID: VWIC-1MFT-G703
Product Description: 1-Port RJ-48 Multiflex Trunk - G.703
Shipping: Typically ships within 2-3 days
Warranty: 1-Year Standard Warranty
Any Questions?
1-800-TO-MULTI or Email

Pre-Owned, Used And Refurbished Cisco VWIC-1MFT-G703

The Cisco VWIC-1MFT-G703, or 1-Port RJ-48 Multiflex Trunk - G.703, is a 1-Port E1 Multiflex Voice/WAN Interface Card that supports voice and data applications on the Cisco 1700, 2600, 3600, and 3700 series routers. Neither NM-HDV nor NM-HD-2VE supports the VWIC-1MFT-G703; only NM-HDV2 supports the VWIC-1MFT-G703. NM-HDV and NM-HDV2 support the VWIC-2MFT-G703; but the NM-HD-2VE does not support the VWIC-2MFT-G703.

Our extensive VWIC-1MFT-G703 inventory provides for quick order turn-around, often allowing us to ship "same day" or within just 1-2 business days. What's more? As an independent supplier, we are able to offer more equipment options than are available through distribution, including new, used and refurbished VWIC-1MFT-G703. In some instances, our pre-owned equipment may still be in new condition, still sealed in original factory packaging (but at a fraction of the cost).

MLCP is committed to quality, and we guaranty any refurbished Cisco VWIC-1MFT-G703 purchase with our standard one year warranty. All used VWIC-1MFT-G703 equipment is tested to factory specifications and packaged professionally for safe transport. As an experienced supplier of pre-owned network hardware, we understand that we have to be better than the manufacturer, and that fundamental principle guides us every day.

Is your interest in the VWIC-1MFT-G703 as a result of an upgrade? We may be interested in your surplus networking equipment and encourage you to take advantage of our flexible "buy-back" options, including an up-front purchase option and generous trade-ins for credit.

For a quote today, simply click onto the "Request a Quote" button on the right, or call 1-800-TO MULTI (866-8584) for assistance. Thank you!

You might also be interested in PVDM2-64.

General Information
Manufacturer: Cisco
Product ID: VWIC-1MFT-G703
Product Description: 1-Port RJ-48 Multiflex Trunk - G.703
Product Type: Voice/WAN Interface Card
Marketing Information

This Module supports E1 G.703 unframed for utilizing the full 2.048 Mbps. The G.703 models can also be configured for framed mode where they support all the features of the other VWIC models. The 1-port E1 Multiflex VWIC connects 1 to 30 DS0 channels (voice calls) to the Digital T1/E1 Packet Voice Trunk Module.

Technical Information
Application/Usage: Voice
Interfaces/Ports
Interfaces/Ports: 1 x E1 WAN
Interfaces/Ports Details: 1 x RJ-48 E1 WAN
Media & Performance
Data Transfer Rate: 2.05 Mbps E1
I/O Expansions
Expansion Slots: Not Applicable
Daughter Cards: Not Applicable
Management & Protocols
Management:
  • Telnet/Console
  • SNMP
  • SNMP Traps
  • Protocols: SNMP
    Controls/Indicators
    Status Indicators:
  • CD (Data Carrier Detect)
  • LP (loopback)
  • AL (Alarm)
  • Environmental Conditions
    Temperature: 32°F (0°C) to 104°F (40°C) Operating
    Humidity: 5% to 85% Operating
    Physical Characteristics
    Dimensions: 0.80" Height x 3.10" Width x 4.80" Depth
    Miscellaneous
    Additional Information:
  • The E1 VWIC version include integrated DSU
  • The 1-port G703 VWIC can be configured as a standard E1 interface and therefore has all the features of the VWIC-1MFT-E1 when not in unframed G.703 mode
  • The 1-port E1 Multiflex VWIC connects 1 to 30 DS0 channels (voice calls) to the Digital T1/E1 Packet Voice Trunk Module
  • There is data-only support for the 1721
  • Transmit Bit Rate: 2.048 Mbps +/- 100 bps/50 PPM
  • Receive Bit Rate: 2.048 Mbps +/- 100 bps/50 PPM
  • Data Rate: 1.984 Mbps (framed mode) Per E1 Port
  • Clocking: Internal and Loop (recovered from network)
  • E1 National Bits: Fixed (non-configurable)
  • Encoding: HDB3
  • DTE Interface (WIC mode): Fractional Service
  • Bit error rate tester (BERT) support requires Cisco IOS Software Release 12.1(1)T or later
  • V.54 loopback requires Cisco IOS Software Release 12.1(1)T or later
  • System Requirements:

    Supported Platforms & Minimum IOS Versions:

  • C2600 Chassis WIC Slots: 12.1(1)T
  • C2600 NM-2W: 12.1(1)T
  • C2600XM Chassis WIC Slots: 12.2(8)T
  • C2691 ChassisWIC Slots: 12.2(8)T
  • C2691 Fast Ethernet NMs (NM-1FE2W, NM-2FE2W, NM-1FE1R2W, NM-2W): 12.2(8)T
  • C3620 and C3640 Ethernet NMs (NM-1E2W, NM-2E2W, NM-1E1R2W): 12.1(1)T
  • C3620 and C3640 Fast Ethernet NMs (NM-1FE2W, NM-2FE2W, NM-1FE1R2W, NM-2W): 12.1(1)T
  • C3631 ChassisWIC Slots: 12.2(2)XT1
  • C3660 Fast Ethernet NMs (NM-1FE2W, NM-2FE2W, NM-1FE1R2W, NM-2W): 12.1(1)T
  • C3700 ChassisWIC Slots: 12.2(8)T
  • C3700 Fast Ethernet NMs (NM-1FE2W, NM-2FE2W, NM-1FE1R2W, NM-2W): 12.2(8)T
  • Compatibility:
  • NM-HDV does not support the 1-port G.703 card
  • Supported Platform:

  • 1721
  • 1751
  • 1760
  • 2600
  • 2600XM
  • 2650XM
  • 3620
  • 3640
  • 3660
  • 3700
  • Supported Carrier Module:

  • 2600: Chassis WIC Slot, NM-2W
  • 2600XM, 2650XM: Chassis WIC Slot, NM-2W, NM-HDV2
  • 3620, 3640, 3660: NM-1E2W, NM-1E1R2W, NM-2E2W, NM-1FE2W, NM-1FE1R2W, NM-2FE2W, NM-2W, NM-HDV2
  • 3700: Chassis WIC Slots, NM-1FE2W, NM-2FE2W, NM-1FE1R2W, NM-2W
  • You might also be interested in:

    MC3810-HCM2

    MC3810-HCM2

    2 DSP High Density Voice Compression Module
    Learn More
    CISCO3825-HSEC/K9

    CISCO3825-HSEC/K9

    3825 Security Bundle,AIM-VPN/EPII-PLUS,Adv. IP Serv,64F/256D
    Learn More
    CISCO2610XM-16TS

    CISCO2610XM-16TS

    2610XM Terminal Server Bundle
    Learn More