PA-2E3

PA-2E3
Manufacturer: Cisco
Product ID: PA-2E3
Product Description: 2 Port E3 Serial Port Adapter with E3 DSUs
Shipping: Typically ships within 2-3 days
Warranty: 1-Year Standard Warranty
Any Questions?
1-800-TO-MULTI or Email

Pre-Owned, Used And Refurbished Cisco PA-2E3

The Cisco PA-2E3, or 2 Port E3 Serial Port Adapter with E3 DSUs, was designed to be compatible with the following routers: Cisco 7200 series,7500 series, and Cisco 7000 series routers with the RSP7000 and RSP7000CI . The PA-2E3 serial port adapter is available on Cisco 7200 series routers, on Cisco 7500 series routers, and on Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI). This port adapter provides two (PA-2E3) high-speed full-duplex synchronous serial E3 interfaces and integrated data service unit (DSU) functionality. The E3 port adapters can transmit and receive data at E3 rates of up to 34 Mbps and use a 75-ohm coaxial cable available from Cisco to connect to a serial E3 network. The PA-2E3 offers 16- and 32-bit cyclic redundancy checks (CRC); High-speed HDLC data; G.751 framing or bypass; HDB3 line coding; Scrambling and reduced bandwidth; E3 MIB (RFC 1407); National service bits; Remote and local loopbacks; and ATM-DXI, Frame Relay, HDLC, PPP, and SMDS serial encapsulation.

We're proud of our reputation built upon providing heavily discounted refurbished equipment and delivering quality hardware to our customers quickly and affordably. We want you to know that we stand behind every product we sell whether it is new or pre-owned. That's why all used and pre-owned equipment is tested upon receipt at our facility - and again before shipment - to factory specifications, ensuring your Cisco PA-2E3 purchase will be ready to install once you receive it. Every product MULTI-LINK Communications Products (MLCP) ships is guaranteed with our standard One Year advanced-replacement warranty.

Are you one of our many customers with surplus Cisco PA-2E3 or other networking equipment? We offer many different methods to help maximize your ROI and capitalize your surplus equipment. If you're interested, please visit our Investment Recapture Page or contact us via phone at 1-800-TO MULTI (866-8584) to explore how we can help extend your networking budget and help you save money by selling us your surplus.

You might also be interested in PA-MC-STM-1SMI.

General Information
Manufacturer: Cisco
Product ID: PA-2E3
Product Description: 2 Port E3 Serial Port Adapter with E3 DSUs
Product Type: Port Adapter
Marketing Information

Cisco PA-2E3 Packet-over-E3 port adapter for the Cisco 7200, Cisco 7301, Cisco 7304, Cisco 7500, and Cisco 7600 Series router offer high-density, highly manageable E3 line termination. Demand for high- capacity corporate backbones, high- speed access to the global Internet, and trunking connections for service provider internetworking has led to growth in clear-channel E3 connections that has outpaced all other types and speeds of leased lines.

Technical Information
Application/Usage: Data Networking
Interfaces/Ports
Interfaces/Ports: 2 x E3
Interfaces/Ports Details: 2 x BNC Duplex Connector E3
Media & Performance
Connectivity Media: Coaxial
Distance Support: 443 ft Coaxial
Data Transfer Rate: 34 Mbps E3 Half/Full-duplex
Management & Protocols
Management:
  • Remote and local loopback support
  • 24-hour history maintained for error statistics and failure counts
  • E3 alarm/event detection (once per second polling)
  • Controls/Indicators
    Status Indicators:

    LEDs per port:

  • RCLK LED (Green) to indicate the port has detected a receive clock signal
  • AIS LED (Yellow) to indicate the port is receiving an AIS
  • OOF LED (Yellow) to indicate the port is in a receive OOF state
  • FERF LED (Yellow) to indicate the port is receiving a FERF
  • Local Loop (Yellow) to indicate E3 port looped locally
  • Remote Loop (Yellow) to indicate the far-end E3 port is looped

  • Environmental Conditions
    Temperature: 32°F (0°C) to 104°F (40°C) Operating
      -4°F (-20°C) to 149°F (65°C) Storage
    Humidity: 10% to 90% Non-condensing Relative Humidity
    Miscellaneous
    Additional Information:
  • HDB3 line coding
  • 16- and 32-bit cycles redundancy check (CRC) supported. (16-bit CRC default)

    Serial encapsulation:

  • HDLC: High-Level Data Link Control
  • PPP: Point-to-Point Protocol
  • Frame Relay
  • ATM-DXI: ATM Data Exchange Interface

  • System Requirements:

    Occupies one port adapter bay on any VIP2 model or one port adapter slot in any Cisco 7200 series router

    Compatibility:
  • CISCO 7200 SERIES ROUTER
  • CISCO 7301 SERIES ROUTER
  • CISCO 7304 SERIES ROUTER
  • CISCO 7500 SERIES ROUTER
  • CISCO 7600 SERIES ROUTER
  • Certifications & Standards:

    E3 physical layer:

  • CCITT G.703
  • CCITT G.751
  • CCITT G.753
  • CTR 24
  • CCITT G.823

    Safety:

  • AS/NZS 3260 (Australia/New Zealand)
  • EN60950/EN41003 (Europe)
  • IEC 950 (National Deviations)

    Emissions:

  • AS/NZS 3548 (Australia/New Zealand)
  • EN55022 (CISPR 22) Class B (Europe)

    Immunity:
  • IEC 1000-4-2 (ESD)
  • IEC 1000-4-3 (Radiated)
  • IEC 1000-4-4 (Fast Transients)
  • IEC 1000-4-5 (Power Line Surge)
  • IEC 1000-4-6 (Injected RF)
  • IEC 1000-3-2 (Harmonic Distortions)

  • You might also be interested in:

    CISCO836-SEC-K9

    CISCO836-SEC-K9

    Cisco 836 Security Bundle with PLUS feature set
    Learn More
    76-ES+XC-40G3CXL

    76-ES+XC-40G3CXL

    7600 ES+XC Combo 20x1GE/ 2x10GE, DFC3CXL
    Learn More
    C2811-VSEC-CUBE/K9

    C2811-VSEC-CUBE/K9

    2811 VSEC Bundle w/PVDM2-16,FL-CUBE-75,AVS,128F/512D
    Learn More