PA-A3-OC3MM

PA-A3-OC3MM
Manufacturer: Cisco
Product ID: PA-A3-OC3MM
Product Description: 1-Port ATM Enhanced OC3c/STM1 Multimode Port Adapter
Shipping: Typically ships within 2-3 days
Warranty: 1-Year Standard Warranty
Any Questions?
1-800-TO-MULTI or Email

Pre-Owned, Used And Refurbished Cisco PA-A3-OC3MM

The PA-A3-OC3MM from Cisco is a The PA-A3 is the multimode standards-based interface option in the PA-A3a series of single-width, single-port, ATM port adapters that provide advanced ATM hardware and software features for the Catalyst 5000 family switches with RSM/VIP2, Catalyst 6000 family switches with FlexWAN module, Cisco 7100 series routers, Cisco 7200 series routers, Cisco 7200 VXR routers, Cisco uBR7200 series routers, Cisco 7201 router, Cisco 7301 router, Cisco 7304 PCI Port Adapter Carrier Card in Cisco 7304 router, Cisco 7401ASR router, and Cisco 7000 series routers and Cisco 7500 series routers with VIP. PA-A3-OC3MM is available new and refurbished as are the other interface options in the PA-A3 series.

With a reputation built upon providing heavily discounted refurbished equipment in particular, MULTI-LINK Communications Products (MLCP) knows that delivering quality hardware to our customers is perhaps more important than cost savings or quick delivery. All used and pre-owned equipment is tested upon receipt at our facility - and again before shipment - to factory specifications, and your Cisco PA-A3-OC3MM purchase is guaranteed with our standard 1 year advanced-replacement warranty.

Do you have surplus Cisco PA-A3-OC3MM or other networking equipment? MLCP offers several different methods to help maximize your ROI and capitalize your surplus equipment. Please visit our Investment Recapture Page or contact us today at 1-800-TO MULTI (866-8584) to explore how you can sell us your surplus so that we can help extend your networking budget a bit further.

You might also be interested in 7204VXR400/VPNK9.

General Information
Manufacturer: Cisco
Product ID: PA-A3-OC3MM
Product Description: 1-Port ATM Enhanced OC3c/STM1 Multimode Port Adapter
Product Type: Port Adapter
Technical Information
Application/Usage: Data Networking
Interfaces/Ports
Interfaces/Ports: 1 x WAN
Interfaces/Ports Details: 1 x SC ATM WAN
Media & Performance
Connectivity Media: 62.5/125 µm Multi-mode Fiber
Distance Support: 1.20 Mile 62.5/125 µm Fiber
Data Transfer Rate: 155.52 Mbps OC-3c/STM-1
Management & Protocols
Management: Advanced Traffic Management:
  • Advanced traffic management mechanisms in the ATM PA-A3 architecture allow for the support of bursty, client/server traffic, while supporting applications that require guaranteed or best-effort service
  • The ATM PA-A3 supports multiple ATM service classes, including Available Bit Rate (ABR), nrt-VBR and UBR, including UBR+ extensions

    Network Management:
  • The ATM PA-A3 will support the following Management Information Bases (MIBs), depending on the Cisco IOS release deployed:
    - MIB II
    - Synchronous Optical Network (SONET) MIB
    - AToM MIB
    - ATM Integrated Local Management Interface (ILMI) MIB
    - LAN Emulation (LANE) MIB
    - DS3/E3 MIB
  • Controls/Indicators
    Status Indicators:
  • ENABLED
  • RX CELLS
  • RX CARRIER
  • RX ALARM
  • Environmental Conditions
    Temperature: 50°F (10°C) to 104°F (40°C) Operating
    Humidity: 0% to 90% Non-condensing
    Miscellaneous
    Additional Information: Main Feature summary:
  • IETF RFC 2684 (updated RFC 1483) support for multiple protocol encapsulations over ATM
  • IETF RFC 2364 and 2516 for PPP over ATM
  • IETF RFC 1577 support for classical IP and ARP over ATM
  • 1024 concurrent SARs
  • ATM service classes: UBR, UBR+, VBR-nrt, ABR (not on OC-12/STM-4 interface)
  • ATM Forum UNI 3.0, 3.1, and 4.0
  • Supports AAL5 ATM adaptation layer for data services
  • Supports AAL2 ATM adaptation layer for voice services (Cisco 7200 with OC-3/STM-1, DS3 and E3 interfaces only)
  • Up to 4096 simultaneous virtual circuits (VCs)
  • Layer 2 per-VC and per-VP queuing and traffic shaping
  • ATM PVCs and SVCs
  • LANE 2.0 client and server
  • F4 & F5 Operations and Maintenance (OAM) cell support
  • MPOA client and server
  • MPLS, MPLS Traffic Engineering, MPLS-VPN, MPLS-COS
  • Interim Local Management Interface (ILMI)
  • System Requirements:
  • Single-width Port Adapter

    Minimum IOS Release:
  • IOS Release 11.1(22)CC
  • IOS Release 12.0(1), 12.0(1)T, 12.0(5)S
  • IOS Release 12.1(1), 12.1(1)E, 12.1(1)T
  • IOS Release 12.2(1), 12.2(1)T
  • Compatibility:
  • Cisco 7200 and 7200VXR series with NPE 150, 175, 200, 225, 300, 400 or NSE-1 series router
  • FlexWAN module for the Catalyst 6000 family
  • Cisco 7500 series with VIP2-40 and VIP2-50
  • Cisco 7500 series with VIP4-50
  • Cisco 7500 series with VIP4-80
  • Certifications & Standards: Regulatory Compliance:
  • Safety:
    - UL 1950 (3rd Ed.)
    - CSA C22.2 No. 950-95
    - EN60950 (1992 including Amendments 1-4 and 11)
    - CE Marking
    - IEC 950 (2nd Ed. including Amendments 1-4)
    - AS/NZS3260 (1993 including Amendments 1-4)
    - EMI
    - FCC Part 15 Class A
    - ICES-003 Class A
    - VCCI Class B
    - EN55022 Class B
    - CISPR22 Class B
    - AS/NZS3548 Class B
    - FDA Class 1 laser
  • You might also be interested in:

    PWR-3900-POE

    PWR-3900-POE

    Cisco 3925/3945 AC Power Supply with Power Over Ethernet (Both system and spare)
    Learn More
    PA-MC-2T1

    PA-MC-2T1

    2 port multichannel T1 port adapter with integrated CSU/DSUs
    Learn More
    C2921-VSEC-SRE/K9

    C2921-VSEC-SRE/K9

    Cisco 2921 SRE Bundle, SRE 700, PVDM3-32, UC and SEC License PAK
    Learn More