PA-MC-2T1

PA-MC-2T1
Manufacturer: Cisco
Product ID: PA-MC-2T1
Product Description: 2 port multichannel T1 port adapter with integrated CSU/DSUs
Shipping: Typically ships within 2-3 days
Warranty: 1-Year Standard Warranty
Any Questions?
1-800-TO-MULTI or Email

Pre-Owned, Used And Refurbished Cisco PA-MC-2T1

The Cisco PA-MC-2T1 is also known as the 2 port multichannel T1 port adapter with integrated CSU/DSUs from industry leader Cisco Systems. The PA-MC-2T1 is supported on the: Catalyst 5000 Family Switches with RSM/VIP2, Catalyst 6000 Family FlexWAN Module in Catalyst 6000 Family Switches, Cisco 7100 Series Routers, Cisco 7200 Series Routers, Cisco 7200 VXR Routers, Cisco uBR7200 Series Routers, Cisco 7201 Router, Cisco 7301Router, Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 Router, Cisco 7401ASR Router, and VIP in the Cisco 7000 Series and Cisco 7500 Series Routers. The PA-MC-2T1is one of three multichannel DS1/PRI port adapters (PA-MC-2T1, PA-MC-4T1, and PA-MC-8T1) that are single-width port adapters. These adapters integrate channel service unit (CSU) functionality, data service unit (DSU) functionality, and DS0 channel support into the Cisco router.

We're proud of our reputation built upon providing heavily discounted refurbished equipment and delivering quality hardware to our customers quickly and affordably. We want you to know that we stand behind every product we sell whether it is new or pre-owned. That's why all used and pre-owned equipment is tested upon receipt at our facility - and again before shipment - to factory specifications, ensuring your Cisco PA-MC-2T1 purchase will be ready to install once you receive it. Every product MULTI-LINK Communications Products (MLCP) ships is guaranteed with our standard One Year advanced-replacement warranty.

Are you one of our many customers with surplus Cisco PA-MC-2T1 or other networking equipment? We offer many different methods to help maximize your ROI and capitalize your surplus equipment. If you're interested, please visit our Investment Recapture Page or contact us via phone at 1-800-TO MULTI (866-8584) to explore how we can help extend your networking budget and help you save money by selling us your surplus.

You might also be interested in 7206VXR400/2+VPNK9.

General Information
Manufacturer: Cisco
Product ID: PA-MC-2T1
Product Description: 2 port multichannel T1 port adapter with integrated CSU/DSUs
Product Type: Port Adapter
Technical Information
Application/Usage: Data Networking
Interfaces/Ports
Interfaces/Ports Details: 2 x RJ-48C Connector
  24 x Channel T1 Per Port WAN
Media & Performance
Connectivity Media: 100 ohm STP
Data Transfer Rate: 1.54 Mbps T1
Management & Protocols
Protocols: PPP
  HDLC
  X.25
  Frame Relay
  IP
  IPX
Controls/Indicators
Status Indicators:
  • Enabled LED
  • One status LED for each port
  • Miscellaneous
    Additional Information: Key Features:
  • Up to eight independent T1 ports per card
  • Channelized T1, fractional T1, full rate T1, and ISDN PRI supported
  • Internal or network clocking selectable on each port
  • Line and payload loopback capabilities
  • Full bit error rate testing capabilities on any T1
  • Alarm detection: alarm indication
  • Support for Frame Relay, Point-to-Point Protocol (PPP), HDLC, SMDS DXI, ISDN PRI, X.25 connections
  • Transmits and receives data bidirectionally at the rate of 1.536 Mbps for each T1 port

    T1/DSX1 version features:
  • DS1 100-ohm interfaces with RJ-48c connectors
  • D4 (Super Frame [SF]) and Extended Superframe (ESF) framing
  • Alternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encoding
  • Data rate to 1.536 Mbps for each T1 port
  • Internal and loop (recovered from network) clocking
  • Full FDL support and FDL performance monitoring, according to configurable standard: ANSI T1.403 or AT&T TR 54016
  • Selectable DSX-1 cable length in increments from 0 to 655 feet
  • Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB
  • Selectable DS1 CSU receiver gain: 26 or 36 dB
  • DS1 line protection per UL1459/1950, FCC part 68
  • Full support for DSX-1 Management Information Base (MIB, RFC 1406), including alarm detection and reporting
  • DSX-1 MIB remote access supported
  • Compatibility:
  • Cisco 7100
  • Cisco 7200
  • Cisco 7200VXR
  • Cisco 7500/VIP2
  • Certifications & Standards: T1/DSX1 Compliance:
  • ANSI T1.403
  • US (UL 1950, 1459, T1)
  • FCC Part 68
  • Canada (C1950, T1)
  • US (FCC part 15J Class A, T1)
  • U.K. (BS6301, EN60950, EN41003)
  • Canada (CSA C108.8 Class A, T1)
  • Bellcore-AT&T Accunet (62411)
  • ATT 54016
  • Japan (VCCI Class 2, T1)
  • You might also be interested in:

    CISCO2516-CH

    CISCO2516-CH

    Ethernet (14-port hub)/dual serial/ISDN/BRI router
    Learn More
    PICK-FAN-MOD-3HS

    PICK-FAN-MOD-3HS

    High-Speed Fan Module for CISCO7603, for SUP720 or Sup2
    Learn More
    7613-S323B-10G-R

    7613-S323B-10G-R

    Cisco7613 Chassis,13-slot, Redundant SUP32-2X10GE-3B and PS
    Learn More