WS-C2950G-48-EI

Multi-Link

1-800-TO-MULTI

Cisco

You're Protected

WS-C2950G-48-EI
Manufacturer:	Cisco
Product ID:	WS-C2950G-48-EI
Product Description:	Catalyst 2950, 48 10/100 with 2 GBIC slots, Enhanced Image
Shipping:	Typically ships within 2-3 days
Warranty:	1-Year Standard Warranty

Any Questions?
1-800-TO-MULTI or Email

Add to Quote Cart

Sell This to MLCP

Overview
Technical Specifications

Pre-Owned, Used And Refurbished Cisco WS-C2950G-48-EI

As one of the several stackable, fixed-configuration switches in the Cisco Catalyst 2950 Series Intelligent Ethernet Switches, the WS-C2950G-EI offers wire-speed connectivity (for both Gigabit Ethernet and Fast Ethernet) for medium-sized networks. As simple to use as LAN switching, the Cisco Catalyst 2950G-48 comes equipped with the Cisco Network Assistant - a comprehensive, user-friendly management application with GUI interface ideal for monitoring, troubleshooting, and configuring the network.

The WS-C2950G-48-EI, like others in the Cisco Catalyst 2950 Series, is a one rack unit that brings intelligent services like enhanced security to the network edge. The EI (Enhanced Software Image) is already installed and the product boasts forty-eight 10/100 ports along with dual fixed GBIC-based 1000BASE-X uplink ports.

Although Cisco no longer sells this product, we do. Not only do we have the Cisco Catalyst 2950G-48 available refurbished and new, we will continue to support the product for one full year after purchase with our MULTI-LINK 1-Year Standard Warranty. With a reputation built upon providing heavily discounted refurbished equipment in particular, MLCP knows that delivering quality hardware to our customers is perhaps more important than cost savings or quick delivery. All used and pre-owned equipment is tested upon receipt at our facility - and again before shipment - to factory specifications.

Do you have surplus Cisco WS-C2950G-48-EI or other networking equipment? Multi-Link offers several different methods to help maximize your ROI and capitalize your surplus equipment. Please visit our Investment Recapture Page or contact us today at 1-800-TO MULTI (866-8584) to explore how you can sell us your surplus so that we can help extend your networking budget a bit further.

You might also be interested in WS-C2950SX-24.

General Information
Manufacturer:	Cisco
Product ID:	WS-C2950G-48-EI
Product Description:	Catalyst 2950, 48 10/100 with 2 GBIC slots, Enhanced Image
Product Type:	Ethernet Switch
Marketing Information
Cisco Catalyst® 2950G-48 is a member of the Catalyst 2950 Series Intelligent Ethernet Switches, and is a fixed-configuration, stackable switch that provides wire-speed Fast Ethernet and Gigabit Ethernet connectivity for midsized networks and the metro access edge. The Catalyst 2950 Series is an affordable product line that brings intelligent services, such as enhanced security, high availability and advanced quality of service (QoS), tothe network edgewhile maintaining the simplicity of traditional LAN switching. When a Catalyst 2950 Switch is combined with a Catalyst 3550 Series Switch, the solution can enable IP routing from the edge to the core of the network. Embedded in Catalyst 2950 Series switches is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Catalyst desktop switches using a standard Web browser. In addition, Cisco CMS Software provides new configuration wizards that greatly simplify the implementation of converged applications and network-wide services.
Interfaces/Ports
Number of Ports:	48
Fast Ethernet Port:	Yes
Interfaces/Ports:	48 x RJ-45 10/100Base-TX LAN
	1 x RJ-45 Console Management
Media & Performance
Connectivity Media:	Category 3 UTP 10Base-T
	Category 4 UTP 10Base-T
	Category 5 UTP 10/100Base-TX
Performance:	Up to 6.8Mbps Forwarding Bandwidth
	13.6Gbps Switching Fabric
	10.1Mpps Forwarding Rate For 64-byte Packet
I/O Expansions
Number of Expansion Slots:	2
Expansion Slots:	(2 Total) GBIC
Network & Communication
Flow Control:	IEEE 802.3x (Full-duplex)
Address Table:	8 K MAC Address -
Management & Protocols
Manageable:	Yes
Management:	SNMP Telnet RMON CWSI (CLI)-based out-of-band embedded CMS
Protocols:	IGMP
	PVST+
	PAgP
	VTP
	DTP
	TFTP
	NTP
	CDP
	LACP
Security Features:	Filtering of incoming traffic flows based on Layer 2, Layer 3, or Layer 4 ACPs prevents unauthorized data flows. Private VLAN edge IEEE 802.1x for dynamic port-based security. STRG The STP PortFast/ BPDU guard TACACS+ and Remote Access Dial-In User Service (RADIUS) authentication
Memory
Standard Memory:	16 MB
Flash Memory:	8 MB
Software
Operating System:	Enhanced Software Image (EI) installed
Controls/Indicators
Status Indicators:	System status LEDs: System RPS Bandwidth utilization Per-port status LEDs: Link integrity Disabled Activity speed Full-duplex
Reliability
MTBF:	18.1 Year
Power Description
Input Voltage:	110 V AC
	220 V AC
Input Voltage Range:	100 V AC to 127 V AC
Input Current:	1 A @ 100 V AC to 127 V AC
	500 mA @ 200 V AC to 240 V AC
Frequency:	50 Hz to 60 Hz
Power Consumption:	Up to 45 W @
Redundant Power Supply:	Yes
Environmental Conditions
Temperature:	32°F (0°C) to 113°F (45°C) Operating
	-13°F (-25°C) to 158°F (70°C) Storage
Humidity:	10% to 85% Non-condensing Relative Humidity Operating
Altitude:	10000 ft Maximum Operating
	15000 ft Maximum Storage
Thermal Dissipation:	154 BTU/h
Physical Characteristics
Dimensions:	1.72" Height x 17.50" Width x 13" Depth
Weight (Approximate):	10 lb
Miscellaneous
Package Contents:	Catalyst 2950 Desktop Switch Hardware Configuration Guide About the Catalyst 2950 and Catalyst 2955 Documentation AC power cord Mounting kit containing these items: - Four rubber feet for mounting the switch on a table, shelf, or desk - Two 19-inch or 24-inch rack-mounting brackets - Six number-8 Phillips flat-head screws for attaching the brackets to the switch - Four number-8 Phillips truss-head screws for attaching the brackets to the switch - Four number-12 Phillips machine screws for attaching the brackets to a rack - One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets - One RPS connector cover and two number-4 pan-head screws
Additional Information:	Configurable maximum transmission unit (MTU) of up to 1530 bytes
Certifications & Standards:	Safety: UL 1950/CSA 22.2 No. 950 IEC 950-EN 60950 AS/NZS 3260, TS001 CE Marking Electromagnetic Emissions: FCC Part 15 Class A EN 55022: 1998 Class A (CISPR22 Class A) EN 55024: 1998 (CISPR24) VCCI Class A AS/NZS 3548 Class A CE Marking CNS 13438 BSMI Class A MIC - IEEE 802.1x support Standards: IEEE 802.1x support IEEE 802.1w IEEE 802.1s IEEE 802.3x full duplex on 10BaseT, 100BaseTX, and 1000BaseT ports IEEE 802.1D STP IEEE 802.1p class-of-service (CoS) prioritization IEEE 802.1Q VLAN IEEE 802.3 10BaseT specification IEEE 802.3u 100BaseTX specification IEEE 802.3ab 1000BaseT specification IEEE 802.3z 1000BaseX specification 1000BaseX (GBIC) 1000BaseSX 1000BaseLX/LH 1000BaseZX 1000Base-CWDM GBIC 1470 nm 1000Base-CWDM GBIC 1490 nm 1000Base-CWDM GBIC 1510 nm 1000Base-CWDM GBIC 1530 nm 1000Base-CWDM GBIC 1550 nm 1000Base-CWDM GBIC 1570 nm 1000BaseE-CWDM GBIC 1590 nm 1000Base-CWDM GBIC 1610 nm RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3

You might also be interested in:

	WS-CE500G-12TC Catalyst Express 8 10/100/1000BT + 4 10/100/1000BT or SFP Uplinks, GUI S/W	Learn More
	WS-C5505-CHAC Catalyst 5505 Chassis with Single AC Power Supply (spare)	Learn More
	CISCO575-LRE-6P Long Reach Ethernet CPE - 6PK	Learn More

Multi-Link Communications Products: 1-800-TO-MULTI

You might also be interested in:

WS-CE500G-12TC

WS-C5505-CHAC

CISCO575-LRE-6P

Site Info

Customer Service

Products

Community