WIC-2T

Pre-Owned, Used And Refurbished Cisco WIC-2T

The WIC-2T is a 2-port Serial WAN Interface Card designed for the Cisco 2600 and 1700 series featuring Cisco's compact, high-density Smart Serial connector to support a wide variety of electrical interfaces when used with the appropriate transition cable. The dual-serial port WAN interface cards require two cables to support the dual ports on the WIC-2T. Each port on the WIC-2T is a non-similar physical interface and can support differing protocols such as Frame Relay and Data Terminal Equipment/Data Communications Equipment or Point-to-Point protocol.

The WIC-2T offers asynchronous support with a max speed (per each of the two ports) of 115.2 Kbps, minimum 600 bps. Should you need to run at speeds lower than 600 bps, you must use the AUX port instead. This interface card also provides synchronous support with a max speed of 8 Mbps per port. It supports a single port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, as well as Cisco 2600 chassis WIC slots. It is important to note that other WIC ports on that network module or Cisco 2600 chassis must not be used. It also supports 8 Mbps on all ports simultaneously if used on 2691, 3725, and 3745. There are no restrictions. There is, however, a max of six ports at 8 Mbps each. Another key restriction to note is that the X.21 interface protocol is definitely not recommended for clock rates beyond 4 MHz. For clock rates beyond 4 MHz, V.35 is interface recommended.

Here at MULTI-LINK Communications Products (MLCP), we're proud of our reputation of providing discounted refurbished equipment to our customers affordably and quickly. But what we're most proud of is that the hardware we sell is of the highest possible quality. We ensure this by testing all used and pre-owned equipment twice - once upon receipt and again before shipping it to our customers - making certain that it meets factory specifications. Your Cisco WIC-2T purchase, regardless of whether it is new or refurbished, comes with our standard lifetime warranty.

Are you ready to upgrade or downsize? MULTI-LINK offers generous trade-in credit for Cisco WIC-2T and other networking equipment. With several methods to help capitalize your surplus equipment and maximize your ROI, we invite you to visit our Investment Recapture Page or contact us at 1-800-TO MULTI (866-8584) to discuss how we can help extend your networking budget. We're happy to help you sell us your surplus hardware.

You might also be interested in VIC3-2FXS-E/DID.